ArnoldBEC PLLC shall retain the services of a waterproofing contractor and/or an independent testing laboratory. Our staff will coordinate their efforts in the performance of pre-design site-related testing and construction work in accordance with the Schedule of Consulting Fees and will include the following:

• Work with the Client and a Contractor to locate and stage rigging on the building
• Provide static testing of windows to the modified standards of ASTM E1105
• Establish procedures required to seal windows and address building leakage properly.
• Provide in-place testing of window sealing procedures.
• Work with a contractor to perform destructive masonry procedures to establish the origin of the problem.
• Establish procedures required to correct masonry problems properly
• Perform in-place testing of installed corrective masonry procedures.
• Review testing procedures and findings with the Client.
• Should corrective procedures involve the designed structural integrity, provide stamped structural engineering reports and recommendations of potential corrective action.
• Provide core testing as required at (balconies), (plaza deck), and (parking garage) to determine the presence and extent of moisture between the structural concrete slab and the overlay concrete slab.
• Based on core samples, develop the extent to which overlay concrete must be repaired or replaced.
• Review core sample findings with the Client.
• Respect for the clients and their objectives
• Coordinate findings and decisions from site testing and sample applications into design criteria to be incorporated into the specifications for remedial work.
• Provide probable cost summary for work based on testing results.
• Provide on-site monitoring and coordination of testing and sample area installation.

Our preliminary services ensure that your project documents will be all-inclusive, with very little to no requirements for change orders.

For More Information about our Pre-Design/Testing Services, please call us Toll-free at 800-535-6329

ArnoldBEC PLLC shall provide an infrared moisture survey on the following designated areas and develop a moisture survey report in accordance with the Schedule of Consulting Fees and will include the following:

• Instrumented thermographic survey of designated roof areas with Raytheon Model PalmIR 250 Infrared imaging system.
• Verification of moisture content via moisture probes and/or capacitance sampling where applicable
• Identification and painting of areas of moisture-laden materials and/or energy loss.
• Core sample analysis of system construction where applicable
• Thermographic and photographic documentation of wet area profiles.
• ASTM moisture content testing as required
• Present to the Client a moisture survey report that provides the following technical information:
  • Summary of survey results with wet area tabulations
  • Core sample summary
  • Recommendations
  • Scaled drawings with wet area locations indicated
  • Thermograms as required for report clarification

For More Information about our Moisture Testing Services, please call us Toll-free at 800-535-6329

ArnoldBEC PLLC shall associate with structural and/or mechanical engineers to perform a comprehensive analysis of the proposed project and Assessment Review Meeting to develop a technical evaluation report in accordance with the Schedule of Consulting Fees and will include the following:

• Assess the condition and performance of the structural systems of the building/deck assembly and evaluate the probable suitability and compliance of the design and code, and criteria. We will identify and appraise deficiencies and distress and categorize them by severity. A review of available construction documents and reports will be made to evaluate the design of structural systems and construction programs. Recommendations for subsequent repairs or budget estimates will be developed. Observations shall be made from a visual basis of the exposed components.
• Field identify and document the load calculation and structural code compliance.
• Perform structural monitoring as required to determine dynamic structural failure.
• Establish areas of structural distress and determine the rate of failure.
• Provide structural design services as required with repair or replacement of roof assemblies.
• Design to provide new mechanical/electrical equipment required with revisions to the facility.
• Design to relocate mechanical/electrical equipment.
• Design for replacement of rooftop mechanical/electrical equipment.
• Present to the Client a structural/mechanical evaluation report that provides the following technical information:
  • Detailed nomenclature with load calculations of existing project construction.
  • Summarization of existing conditions and photographs that correspond
  • Appraisal of existing construction/equipment remediation alternatives and value engineering.
  • Recommendations based on existing conditions – based on structural analysis and requirements.
  • Project probable cost summary based on structural/mechanical requirements of the existing facility

For More Information about our Structural/Mechanical Engineering Services, please call us Toll-free at 800-535-6329

Upon approval of the preliminary system design and project and probable cost summary by the Client, ArnoldBEC PLLCwill prepare related bid assessment Review Meeting and construction documents, specifications, drawings, and related details in accordance with the Schedule of Consulting Fees and will include the following:

• Review existing conditions with the manufacturer for potential warranty claims and negotiate for possible warranty involvement with repairs/replacement.
• Prepare Bid Forms, Payment and Performance Bond Forms, and Release of Lien Forms.
• Insert Owner’s Construction Contractor AIA Contract.
• Review and include General Conditions and Supplemental Conditions to the Contract.
• Review and research material properties and Specifications.
  Prepare Scope of Work.
• Compile Construction Documents, including detailed Drawings and Specifications.

For More Information about our Construction Document Services, please call us toll-free at 800-535-6329

Upon Client approval of Construction Documents/Project Manual, ArnoldBEC PLLC shall provide Bidding Services in accordance with the Schedule of Consulting Fees that will include the following:

• Conduct Contractor Pre-Qualification Review.
• Develop a list of pre-qualified contractors to bid on the required work known to be competent with the work required and approved by the specified product manufacturers for work required to receive the specified warranties.
• Notify bidding contractors of the date, time, and place of the pre-bid conference.
• Schedule, attend, and assist Client with Pre-Bid Conferences.
• Review Substitution Requests during Bidding.
• Coordinate requests for information and distribute them to all bidding contractors.
• Prepare and Distribute Addenda.
• Review Bidding Results and Prepare Bid Analysis (Tabulation).
• Negotiate a suitable contract amount (Optional) with the contractor.
• Make Recommendations to the Owner.
• Assisted in developing and/or writing the Owner/Contractor Agreement.

For More Information about our Bidding & Negotiation Services, please call us Toll-free at 800-535-6329

ArnoldBEC PLLC shall provide Construction Phase Services and coordinate the work of the contractors with the activities of the facility to complete the project in accordance with the Client’s objectives on cost, time, and quality based on the Schedule of Consulting Fees and will include the following:

• Review shop drawings and product submittals.
• Schedule and conduct the pre-construction conference.
• Schedule and conduct progress meetings at which Contractor, Client, and Project Manager can discuss procedures, progress, problems, and scheduling.
• Processing of applications by Contractors for progress and final payments and forwarding to Client with recommendations.
• Perform Project Observation of the work of the Contractors to determine whether the work is being performed in accordance with the requirements of the Contract Documents.
• Upon the Contractor’s determination and notification to the Client and Consultant of substantial completion, prepare a list of incomplete or unsatisfactory items and observe the erection and completion of final work’s co.
• Determine final completion, provide written notice to the Client, and have the Contractor notify the manufacturer that the project is ready for final review.
• Secure from the Contractor and transmit to the Client required guarantees, affidavits, releases, bonds, and waivers.

For More Information about our Construction Phase Services, please call us Toll-free at 800-535-6329